Western Telematic Data/FaxModem manual Specifications, Power

Page 24

RMM User’s Guide

7. Specifications

Compatibility:

ITU-T V.34+: 33.6 Kbps

ITU-T V.34: 28.8 Kbps

ITU-T V.32 bis: 14.4 Kbps

ITU-T V.32: 9600 bps

ITU-T V.22 bis: 2400 bps

Bell: 212 / V.22, 103 / V.21

Supports: V.42 / MNP 2-4 Error Control

V.42 bis / MNP 5 Data Compression.

Command Set: Industry Standard “AT” Commands

Status/Help: Status display shows current settings and stored numbers. A Help display summarizes the command set and S-Register functions.

FCC Reg. No.: CJEUSA-24375-M5-E

Ringer Equivalence: 0.9 B

Compliance: FCC Part 68 / Part 15 Class B

Temperature: 0° to 50° C (operating)

Power:

AC Model: 115/230 VAC, 50/60 Hz, 10 Watts (switchable)

DC Model: 40 - 60 VDC, 10 Watts Maximum

Size: 1.75" x 19.00" x 4.5" (H x W x D)

Weight: 4 pounds shipping weight

Page 22

Image 24
Contents RMM Sterling Irvine California 949 586-9950 Toll Free Introduction Front PanelFront Panel Indicators Unit DescriptionOperation ATZ3Installation Volt DC Power OptionDip Switch Settings RMM User’s Guide Command Summary Command Function/OptionsDials the specified phone number Sr.b=n Sets result code displayed. Default is Resets modem based on current DIP Switch settings Loads a read-only non-programmable Sets connect speed. If connection cannot be established Begins test modes Zn=s Register Default Function RegistersDefault Function Bit Value Enables ITU-T V.21 modulation at Call Indicate enabled Register Default Specifications PowerCustomer Service Trademark and Copyright Information