|
|
| Command Summary |
| Command | Function/Options | |
| Zn | Resets modem based on current DIP Switch settings. | |
|
| Z0 | Resets modem to NVRAM profile |
|
|
| selected by the Y command |
|
| Z1 | Resets modem to NVRAM profile 0 |
|
| Z2 | Resets modem to NVRAM profile 1 |
|
| Z3 | Resets modem to factory default |
|
|
| profile 0 (&F0) |
|
| Z4 | Resets modem to factory default |
|
|
| profile 1 (&F1) |
|
| Z5 | Resets modem to factory default |
|
|
| profile 2 (&F2) |
| &$ | Displays a list of ampersand (&) commands. | |
| &An | Enables/disables additional result code subsets (see Xn). | |
|
| &A0 | ARQ result codes disabled |
|
| &A1 | ARQ result codes enabled |
|
| &A2 | V.32 modulation indicator added |
|
| * &A3 | Protocol indicators added- |
|
|
| LAPM/MNP/NONE (error control) and |
|
|
| V42BIS/MNP5 (data compression) |
| &Bn | Manages modem's serial port rate. | |
|
| &B0 | Variable, follows connection rate |
|
| * &B1 | Fixed serial port rate |
|
| &B2 | Fixed in ARQ mode, variable in |
|
|
| |
| &Cn | Controls Carrier Detect (CD) signal. | |
|
| See DIP Switch 6 (Section 4.2). | |
|
| &C0 | CD override |
|
| * &C1 | Normal CD operations |
| &Dn | Controls Data Terminal Ready (DTR) operations. | |
|
| See DIP Switch 1 (Section 4.2). | |
|
| * &D0 | DTR override |
|
| &D1 | DTR toggle causes online |
|
|
| Command mode |
|
| &D2 | Normal DTR operations |
|
| &D3 | Resets on receipt of DTR |
Page 11