Western Telematic Data/FaxModem manual Dip Switch Settings

			Installation
4.2. Dip Switch Settings
Switch	Factory	Function
	Setting
1		Data Terminal Ready (DTR) Override
	￿	UP	Normal DTR operations: Computer must
			provide DTR signal for modem to accept
			commands. Dropping DTR terminates call.
		DOWN	DTR Override: Modem ignores DTR
2		Verbal/Numeric Result Codes
	￿	UP	Verbal (Word) Results
		DOWN	Numeric Results
3		Result Code Display
		UP	Suppress Result Codes
	￿	DOWN	Display Result Codes
4		Command Mode Local Echo Suppression
	￿	UP	Enable Echo
		DOWN	Suppress Echo
5		Auto Answer Suppression
	￿	UP	Auto Answer On: Modem answers on first
			ring, or higher if specified in NVRAM
		DOWN	Auto Answer Off: Disable auto answer
6		Carrier Detect (CD) Override
	￿	UP	Normal: Modem sends CD signal when
			connecting with another modem, drops CD on
			disconnect
		DOWN	Override: CD always ON
7		Power-On and ATZ Reset Software Defaults
		UP	User Defaults: Load Y or Y1 configuration
			from user-defined nonvolatile memory
			(NVRAM).
	￿	DOWN	Factory Defaults; Load &F0 (Generic)
			template from read-only memory (ROM).
8		AT Command Set Recognition
		UP	Dumb Mode: Disables command recognition
	￿	DOWN	Smart Mode: Enables command recognition

Page 5