Western Telematic RMM-288 manual Users Guide, Table of Contents

Page 1

RMM Rack Mount Modem; User's Guide

WTI Part No.: 12548

Rev. F

RMM

Rack Mount Data/Fax Modem

User's Guide

5 Sterling, Irvine, California 92618-2517

U.S. and Canada: 1-800-854-7226

Phone: (949) 586-9950

Fax: (949) 583-9514

http://www.wti.com

Table of Contents

●1. Introduction

●2. Unit Description

❍2.1. Front Panel Indicators

●3. Operation

●4. Installation

❍4.1. 48 Volt DC Power Option

❍4.2. Dip Switch Settings

●5. Command Summary

file:///C/WEBPAGE/guides/rmm/rmm_manl.htm (1 of 21) [2/7/2000 10:55:42 AM]

Image 1

Contents Users Guide Table of ContentsUnit Description IntroductionStatus Meaning Operation BAUD=9600 PARITY=N WORDLEN=8 DIAL=PULSE on Hook InstallationSwitch Factory Function Command Function/Options Command SummaryOriginates call using answer reverse frequencies Pulse Rotary Dial ModeResult Codes Sets result code displayed. The default isRequires @ in dial string replaces no Carrier ConnectControls Carrier Detect CD signal Fixed in ARQ mode, variable in non-ARQ modeSwitch DTR override DTR toggle causes online Command Mode V42BIS/MNP5 data compressionLoads a read-only non-programmable factory configuration Resets on receipt of DTRHz guard tone some European countries requires B0 setting Hz guard tone U.K. requires B0 settingRMM Rack Mount Modem Users Guide Remote Digital with self test and error detector Enables Remote Digital LoopbackAnalog Loopback with self test and error detector Modem controls DSRRegisters Register Default FunctionBit Value Result Disable ARQ/MNP for .22 bis Disable ARQ/MNP forDisable ARQ/MNP for V.32 / V.32bis Disable MNP handshakeOriginates V.21 calls Default Bell Enables ITU-T V.21 modulation at 300 bpsEnables un-encoded non-trellis coded Modulation in V.32 modeEnable V.8 mode Enable V.8 Call IndicateDisable V.34 modulation Disable 33.6 Kbps supportSpecifications Power Customer ServiceRinger Equivalence 0.9 B January Part Number 12548 Revision F