RMM Rack Mount Modem; User's Guide
Command Function/Options
Yn Selects
| * | Y0 | Default is profile 0 setting in NVRAM. |
|
| Y1 | Default is profile 1 setting in NVRAM. |
Zn | Resets modem based on current DIP Switch settings. | ||
|
| Z0 | Resets modem to NVRAM profile selected by the Y command. |
|
| Z1 | Resets modem to NVRAM profile 0. |
|
| Z2 | Resets modem to NVRAM profile 1. |
|
| Z3 | Resets modem to factory default profile 0 (&F0). |
|
| Z4 | Resets modem to factory default profile 1 (&F1). |
|
| Z5 | Resets modem to factory default profile 2 (&F2). |
&$ | Displays a list of ampersand (&) commands. | ||
&An | Enables/disables additional result code subsets (see Xn). | ||
|
| &A0 | ARQ result codes disabled. |
|
| &A1 | ARQ result codes enabled. |
|
| &A2 | V.32 modulation indicator added. |
| * | &A3 | Protocol indicators added - LAPM/MNP/NONE (error control) and |
|
|
| V42BIS/MNP5 (data compression). |
&Bn | Manages modem's serial port rate. | ||
|
| &B0 | Variable, follows connection rate. |
| * | &B1 | Fixed Serial port rate. |
|
| &B2 | Fixed in ARQ mode, variable in |
&Cn | Controls Carrier Detect (CD) signal. | ||
|
| &C0 | CD override |
| * | &C1 | Normal CD operations |
&Dn | Controls Data Terminal Ready (DTR) operations. Also controlled by DIP | ||
| Switch 1. |
| |
|
| &D0 | DTR override |
|
| &D1 | DTR toggle causes online Command Mode. |
file:///C/WEBPAGE/guides/rmm/rmm_manl.htm (10 of 21) [2/7/2000 10:55:43 AM]