RMM Rack Mount Modem; User's Guide
| * | &D2 | Normal DTR operations |
|
| &D3 | Resets on receipt of DTR |
&Fn | Loads a | ||
|
| &F0 | Generic Template |
| * | &F1 | Hardware flow control template |
|
| &F2 | Software flow control template |
&Gn | Sets Guard Tone | ||
| * | &G0 | No guard tone (U.S.A. and Canada). |
|
| &G1 | 550 Hz guard tone (some European countries); requires B0 setting. |
|
| &G2 | 1800 Hz guard tone (U.K.); requires B0 setting. |
&Hn | Sets Transmit Data (TD) flow control. | ||
|
| &H0 | Flow control disabled. |
| * | &H1 | Hardware flow control, Clear to Send (CTS). |
|
| &H2 | Software flow control, XON/XOFF. |
|
| &H3 | Hardware and Software flow control. |
&In | Sets Receive Data (RD) software flow control (see also &Rn). | ||
| * | &I0 | Software flow control disabled. |
|
| &I1 | XON/XOFF signals to your modem and remote system. |
|
| &I2 | XON/XOFF signals to your modem only. |
&Kn | Enables/disables data compression. | ||
|
| &K0 | Data compression disabled |
| * | &K1 | Auto enable/disable |
|
| &K2 | Data compression enabled |
|
| &K3 | MNP5 compression disabled |
&Mn | Sets Error Control (ARQ for connection at 1200 bps and higher. | ||
|
| &M0 | Normal mode, error control disabled |
|
| &M1 | Reserved |
|
| &M2 | Reserved |
|
| &M3 | Reserved |
| * | &M4 | Normal/ARQ |
file:///C/WEBPAGE/guides/rmm/rmm_manl.htm (11 of 21) [2/7/2000 10:55:43 AM]