Western Telematic RMM-288 manual Modem controls DSR, Begins test modes, Ends test in progress

Page 13

RMM Rack Mount Modem; User's Guide

	&S1	Modem controls DSR
&Tn	Begins test modes
	&T0	Ends test in progress
	&T1	Analog Loopback
	&T2	Reserved
	&T3	Local Digital Loopback
	&T4	Enables Remote Digital Loopback
	* &T5	Prohibits Remote Digital Loopback
	&T6	Initiates Remote Digital Loopback
	&T7	Remote Digital with self test and error detector
	&T8	Analog Loopback with self test and error detector
&Un	Sets floor connect speed when &Un is greater than 0 (zero). &Nn is the
	ceiling connect speed (See also &Nn).

*&U0 Disabled

&U1 300 bps

&U2 1200 bps

&U3 2400 bps

&U4 4800 bps

&U5 7200 bps

&U6 9600 bps

&U7 12,000 bps

&U8 14,400 bps

&U9 16,800 bps

&U10 19,200 bps

&U11 21,600 bps

&U12 24,000 bps

&U13 26,400 bps

&U14 28,800 bps

&U15 31,200 bps

&U16 33,600 bps

&Wn Writes current configuration to NVRAM templates.

file:///C/WEBPAGE/guides/rmm/rmm_manl.htm (13 of 21) [2/7/2000 10:55:44 AM]

Image 13

Contents Users Guide Table of ContentsUnit Description IntroductionStatus Meaning Operation BAUD=9600 PARITY=N WORDLEN=8 DIAL=PULSE on Hook InstallationSwitch Factory Function Command Function/Options Command SummaryOriginates call using answer reverse frequencies Pulse Rotary Dial ModeResult Codes Sets result code displayed. The default isRequires @ in dial string replaces no Carrier ConnectControls Carrier Detect CD signal Fixed in ARQ mode, variable in non-ARQ modeSwitch DTR override DTR toggle causes online Command Mode V42BIS/MNP5 data compressionLoads a read-only non-programmable factory configuration Resets on receipt of DTRHz guard tone some European countries requires B0 setting Hz guard tone U.K. requires B0 settingRMM Rack Mount Modem Users Guide Remote Digital with self test and error detector Enables Remote Digital LoopbackAnalog Loopback with self test and error detector Modem controls DSRRegisters Register Default FunctionBit Value Result Disable ARQ/MNP for .22 bis Disable ARQ/MNP forDisable ARQ/MNP for V.32 / V.32bis Disable MNP handshakeOriginates V.21 calls Default Bell Enables ITU-T V.21 modulation at 300 bpsEnables un-encoded non-trellis coded Modulation in V.32 modeEnable V.8 mode Enable V.8 Call IndicateDisable V.34 modulation Disable 33.6 Kbps supportSpecifications Power Customer ServiceRinger Equivalence 0.9 B January Part Number 12548 Revision F