2101 Field Wizard Section 1 Introduction
1.3Identifying Module Components
Figures 1-2 through 1-3 identify the key components of the 2101 Field Wizard.
The Field Wizard is operated from the top panel, which contains a keypad and liquid crystal display. The keypad, shown in Figure 1-1, includes 26 keys that are used to program and operate the Field Wizard.
DWG
Help Key
Arrow Keys
Figure 1-1 Field Wizard Keypad and Display
The keypad contains six software configured function keys (soft keys) that are used to make selections and navigate through menus. Their specific functions will depend upon what operation you are performing, and will be shown in the display window.
The four arrow keys are used for navigation within menus and displays. The Enter key is used to complete data entry, acknowledge prompts, and signal the start of certain operations. Numeric keys are active when numeric data is to be entered. Press the Help key to obtain context sensitive help.
The Power key places the unit into an ultra low power state, during which the display window will be blank.
The Escape key is not currently used. During some operations, one of the function keys will serve as a Cancel key.
The unit is equipped with an audible beeper. The beeper acknowledges key presses, and signals errors when incorrect entries are made.