Teledyne 2101 installation and operation guide Data Display

2101 Field Wizard

Section 3 Operation

Sensor Diagnostics – When you press F5 DIAG from the Site Setup display, the diagnostic screen shown in Figure 3-15 will be displayed.

Figure 3-15 Sensor Diagnostics Display

	After a momentary delay, during which the Field Wizard
	requests the report from the 2100 Series module, a screen con-
	taining diagnostic results for the selected module’s sensors will
	appear. Use the four directional arrow keys to scroll through the
	information.
	Once you have viewed the information, press F6 EXIT to exit to
	the Site Setup display.
3.6.4 Data Display	When you press F4 DATA from the Main Display, the Data
	screen shown in Figure 3-16 will appear.

Figure 3-16 Data Display

This display shows information about the data stored inside the currently selected module: the time and date of the most recent reading, total number of readings, and the quality of the readings (percentage that are good). Use the Up and Down arrow keys to scroll through the information.

When multiple 2100 Series modules are present, you can press

F2 NEXT to display the information for a different module.

3-15