2101 Field Wizard
Section 3 Operation
Figure 3-2 Flowlink Site Info Screen
Complete the following steps:
1.Click the Synchronize Instrument’s Time to Com- puter’s button to synchronize the Field Wizard’s time to that of your PC. (If you are using multiple PCs, select just one PC to synchronize with.) You will be notified that this operation will set the time of the Field Wizard to match that of the PC. Click OK.
2.The Field Wizard is shipped with default site and module names. Use the Site Name and Module Name fields if you want to provide more descriptive names. Select Apply (F9) to write that information to the instrument.
3.Click Retrieve Data (F8) to retrieve the data from the Field Wizard. For synchronization purposes, this should be done even if this is the first time you are connecting the Field Wizard to the PC. The process transfers a file con- taining site interrogation times from Flowlink to the Field Wizard. With this information, the Field Wizard will know when data was last retrieved from your site(s). When brought to a site, the Field Wizard will retrieve only the necessary data.
The process will take some time. A gauge will be displayed so you can monitor the progress. If needed, click Cancel to cancel the data transfer. The data will be retained in the Field Wizard.
Data that has been retrieved by the PC will remain in the Field Wizard until it is connected to a site and begins col- lecting new data. This allows you to copy data to multiple PCs.
4.Select Disconnect to end your PC session and disconnect the Field Wizard.