You should find these standard items:
•2 mounting ears
•2 rack slides (inner and outer slides)
•4 post slide mount adapters
•hex screws (+) and hex nuts (for outer slides)
•hex screws (for slide mount adapter – dark colored)
Cabinet Slides and Ears
1.Attach the mounting ears to the side near the front of the cabinet. Then secure each with two screws.
2.Detach the inner slide from the outer slide by pressing on the release latch Œ and pulling apart the inner slide from the outer slide •. Do the same for the other slide.
3.Align the inner slide’s first round screw hole with the screw hole on the system chassis beside the mounting ears and attach the screw together with next screw hole. Do the same for the other side.
NOTE: For the correct orientation on mounting the inner slides to the cabinet, refer to the picture above.
22
http://www.TYAN.com