5.2Resetting BIOS Setup
When you want to reset the BIOS configuration, you need to change the jumper setting. See the next figure for jumper location and the table that follow for jumper definition.
CAUTION: Jumpers not described in this section are reserved for factory use only. Do not change the default settings.
| Jumper | Definition | Setting | Description |
| J2 | CMOS setting | Normal (default) | |
|
|
|
|
|
|
|
| Clear CMOS | |
|
|
|
| To clear the RTC and CMOS RAM, set J2 to |
|
|
|
| one second and set it back to |
|
|
|
|
|
56
http://www.TYAN.com