4.Attach a post slide mount adapter to the front end of the outer slide by securing 2 sets of hex screws and hex nuts together.
5.Attach a post slide mount adapter to the rear end by moving the inner rails to expose the screw holes. Do the same for the other outer slide.
6.Attach the newly assembled outer slide with the post slide mount adapters to the front and rear corners of the rack that you will use to place the system chassis by securing only the first and last screw holes
Cabinet into the Rack
Slide system cabinet Œ with the inner slides previously installed into the inner rails of the outer slides attached to the rack and press on the release latch • until the front panel is aligned with the front edge of the rack.
23
http://www.TYAN.com