Tyan Computer Transport GS12, B5103G12S2 manual Replacing the Blower, Replacing the Motherboard

Reverse the above sequence when installing the new power supply.

8.8 Replacing the Blower

To replace the system’s blower, follow these procedures.

1.Remove the cabinet cover (see the previous section in this chapter).

2.Remove the two screws securing the blower to the system chassis and detach the blower to pin-header cable from the connector on the motherboard.

Reverse the above sequence when installing the new blower.

8.9 Replacing the Motherboard

To replace the motherboard, follow these procedures.

1.Remove the cabinet cover (see the previous section in this chapter).

2.Remove the primary hard disk drive (see chapter 2 on Installing a Hard Disk Drive).

3.Remove the secondary hard disk drive (see chapter 7 on Adding a Secondary Hard Disk Drive).

4.Remove the power supply (see the previous section in this chapter).

82

http://www.TYAN.com