Tyan Computer Thunder i7505 Connecting External Devices, Audio Port Line In Jack, Line Out Jack

Page 21

2.25 – Connecting External Devices

The following diagrams will detail the rear port stack f or this S2665 motherboard:

a. Audio Port

Line In Jack

Connects to external devices for playback or recording

Line Out Jack

Connects to headphone or speakers (Amplifier integrated)

Microphone In Jack

Connects to an external microphone

b. USB 2.0/1.1

USB 2.0 /1.1

Four rear USB 2.0/1.1 connectors

Two front USB 2.0/1.1 headers (J73)

c. SPDIF

SPDIF RCA connector

Sony/Philips Digital Interface (SPDIF) is the newest audio transfer file format. It provides impressive sound quality through thi s RCA connector and allows you to enjoy digital audio instead of analog audio.

d. RJ45 LAN Port

e. IEEE 1394

IEEE 1394 connector

One rear IEEE 1394 Firewire connector One front IEEE 1394 Firewire header J66 (See page -8 for jumper)

http://www.TYAN.com

Image 21

Contents Thunder S2665 Table of Contents Before you begin… Check the box contents Introduction BiosIntegrated I/O Integrated PCI IDESystem Management Form FactorInstallation Board InstallationHow to install our products right….the first time Do not Apply Power to the Board if IT has Been DamagedBoard Page Close Pin-1 and Pin-2 Default Jumper and Connector Settings FunctionClose Pin-1 and Pin-2 Default J65 J11Enable/Disable Onboard LAN Jumper J10 J16 CD Audio connectorFan Connectors J11, J19, J22, J32, J38, J55 and J60 ClosePS/2 Acpi Jumper J12 Pin-3 Close Pins 1 and 2 Default Pin-3 Close Pins 2Flashing Bios Protection Jumper J13 Disable Slot-A PCI-X Capability Jumper J30 Disable Slot-B and Slot- C PCI- X Capa bility Jumper J31Clear CM OS Jumper J50 Default Pin-1 Close Pins 2 Ieee 1394 Connector J66LCD Connector J69 GND VCCFront Panel Connector J74 Signal Description Pin # OEM Reserved Connectors and JumpersScsi RAID PCI Slot-C Mounting the Motherboard Installing the MemoryMemory Installation Procedure Reminder Installing the Processors and HeatsinksPage Installing Add- In Cards Finishing Installing the HeatsinkSpdif Spdif RCA connector Connecting External DevicesRJ45 LAN Port Ieee Ieee 1394 connector Audio Port Line In JackInstalling the Power Supply Attaching IDE and Floppy Drive Cables Finishing Up Bios Setup Utility BiosMain To select an itemBios Menu Bar Bios Legend BarKey Function Enable Acpi Sub-Menu Feature Bios Main MenuInstall OS Sub-Menu Feature Win2000/XP Reset Configuration Data Sub-Menu FeatureProcessors Sub-Menu Feature Option Description Bios Advanced MenuEnabled Chipset Sub-Menu Feature Option DescriptionECP IRQ4IRQ7 DMA3AGP Slot Sub-Menu Feature Option Description PCI Device Slot n Sub-Menu Feature Option Description128Mb Bios Power Menu Bios Security MenuPower Remote Power -On Sub-Menu Feature Option DescriptionAGP Load Setup Defaults Bios Exit MenuExit Exit Saving ChangesDiagnostics CPU, Memory, Video Beep CodesFlash Utility Appendix I Glossary Page Page Page Technical Support Returning Merchandise for ServiceDocument # D1491