Tyan Computer Thunder i7505, S2665 warranty PS/2 Acpi Jumper J12 Pin-3 Close Pins 1 and 2 Default

Page 11

2.6 – PS/2 ACPI Jumper (J12)

pin-3

CLOSE Pins 1 and 2 (Default)

To disable PS/2 devices’ ACPI wake up function

pin-3

CLOSE Pins 2 and 3

To enable PS/2 devices’ ACPI wake up function

2.7 – Flashing BIOS Protection Jumper (J13)

OPEN (Default)

To disable BIOS protection

System BIOS can be flashed with flashing utility

CLOSE

To enable BIOS protection

System BIOS can not be flashed with flashing utility

2.8 – Rear Panel USB ACPI Jumper (J14)

pin-3

CLOSE Pins 1 and 2 (Default)

To disable rear panel USB devices’ ACPI

S3/S4/S5 wake up function

pin-3

CLOSE Pins 2 and 3

To enable rear panel USB devices’ ACPI

S3/S4/S5 wake up function

Total current of all USB devices should not exceed the standby current rating of the power supply

http://www.TYAN.com

Image 11

Contents Thunder S2665 Table of Contents Before you begin… Check the box contents Introduction BiosForm Factor Integrated PCI IDEIntegrated I/O System ManagementDo not Apply Power to the Board if IT has Been Damaged Board InstallationInstallation How to install our products right….the first timeBoard Page J11 Jumper and Connector Settings FunctionClose Pin-1 and Pin-2 Default Close Pin-1 and Pin-2 Default J65Close J16 CD Audio connectorEnable/Disable Onboard LAN Jumper J10 Fan Connectors J11, J19, J22, J32, J38, J55 and J60Flashing Bios Protection Jumper J13 PS/2 Acpi Jumper J12 Pin-3 Close Pins 1 and 2 DefaultPin-3 Close Pins 2 Clear CM OS Jumper J50 Default Disable Slot-A PCI-X Capability Jumper J30Disable Slot-B and Slot- C PCI- X Capa bility Jumper J31 LCD Connector J69 Pin-1 Close Pins 2Ieee 1394 Connector J66 GND VCCScsi RAID PCI Slot-C Front Panel Connector J74 Signal Description Pin #OEM Reserved Connectors and Jumpers Mounting the Motherboard Installing the MemoryMemory Installation Procedure Reminder Installing the Processors and HeatsinksPage Installing Add- In Cards Finishing Installing the HeatsinkAudio Port Line In Jack Connecting External DevicesSpdif Spdif RCA connector RJ45 LAN Port Ieee Ieee 1394 connectorInstalling the Power Supply Attaching IDE and Floppy Drive Cables Finishing Up To select an item BiosBios Setup Utility MainKey Function Bios Menu BarBios Legend Bar Win2000/XP Reset Configuration Data Sub-Menu Feature Bios Main MenuEnable Acpi Sub-Menu Feature Install OS Sub-Menu FeatureChipset Sub-Menu Feature Option Description Bios Advanced MenuProcessors Sub-Menu Feature Option Description EnabledDMA3 IRQ4ECP IRQ7128Mb AGP Slot Sub-Menu Feature Option DescriptionPCI Device Slot n Sub-Menu Feature Option Description Remote Power -On Sub-Menu Feature Option Description Bios Security MenuBios Power Menu PowerAGP Exit Saving Changes Bios Exit MenuLoad Setup Defaults ExitFlash Utility DiagnosticsCPU, Memory, Video Beep Codes Appendix I Glossary Page Page Page Technical Support Returning Merchandise for ServiceDocument # D1491