Tyan Computer S2665 warranty J16 CD Audio connector, Enable/Disable Onboard LAN Jumper J10, Close

Page 10

2.3 – AUX Audio Connector (J8) and CD Audio Connector (J16)

J 8 (AUX Audio connector)

Connects to internal audio sources such as TV tuner, MPEG, or other similar cards

J16 (CD Audio connector)

Connects to a CD-ROM drive via an optional

CD audio cable

2.4 – Enable/Disable Onboard LAN Jumper (J10)

OPEN (Default)

To enable onboard LAN

CLOSE

To disable onboard LAN

2.5 – Fan Connectors (J11, J19, J22, J32, J38, J55 and J60)

Use these headers to connect chassis and processor cooling fans to your motherboard. Cooling fans can keep the system stable and reliable for its product life.

Max 850mA fans supported

10

http://www.TYAN.com

Image 10

Contents Thunder S2665 Table of Contents Before you begin… Check the box contents Bios IntroductionSystem Management Integrated PCI IDEIntegrated I/O Form FactorHow to install our products right….the first time Board InstallationInstallation Do not Apply Power to the Board if IT has Been DamagedBoard Page Close Pin-1 and Pin-2 Default J65 Jumper and Connector Settings FunctionClose Pin-1 and Pin-2 Default J11Fan Connectors J11, J19, J22, J32, J38, J55 and J60 J16 CD Audio connectorEnable/Disable Onboard LAN Jumper J10 ClosePin-3 Close Pins 2 PS/2 Acpi Jumper J12 Pin-3 Close Pins 1 and 2 DefaultFlashing Bios Protection Jumper J13 Disable Slot-B and Slot- C PCI- X Capa bility Jumper J31 Disable Slot-A PCI-X Capability Jumper J30Clear CM OS Jumper J50 Default Ieee 1394 Connector J66 Pin-1 Close Pins 2LCD Connector J69 VCC GNDOEM Reserved Connectors and Jumpers Front Panel Connector J74 Signal Description Pin #Scsi RAID PCI Slot-C Installing the Memory Mounting the MotherboardMemory Installation Procedure Installing the Processors and Heatsinks ReminderPage Finishing Installing the Heatsink Installing Add- In CardsRJ45 LAN Port Ieee Ieee 1394 connector Connecting External DevicesSpdif Spdif RCA connector Audio Port Line In JackInstalling the Power Supply Attaching IDE and Floppy Drive Cables Finishing Up Main BiosBios Setup Utility To select an itemBios Legend Bar Bios Menu BarKey Function Install OS Sub-Menu Feature Bios Main MenuEnable Acpi Sub-Menu Feature Win2000/XP Reset Configuration Data Sub-Menu FeatureEnabled Bios Advanced MenuProcessors Sub-Menu Feature Option Description Chipset Sub-Menu Feature Option DescriptionIRQ7 IRQ4ECP DMA3PCI Device Slot n Sub-Menu Feature Option Description AGP Slot Sub-Menu Feature Option Description128Mb Power Bios Security MenuBios Power Menu Remote Power -On Sub-Menu Feature Option DescriptionAGP Exit Bios Exit MenuLoad Setup Defaults Exit Saving ChangesCPU, Memory, Video Beep Codes DiagnosticsFlash Utility Appendix I Glossary Page Page Page Returning Merchandise for Service Technical SupportDocument # D1491