Tyan Computer Thunder i7505, S2665 Pin-1 Close Pins 2, Ieee 1394 Connector J66, LCD Connector J69

Page 13

2.12 – Front Panel USB ACP I Jumper (J65)

pin-1

CLOSE Pins 1 and 2 (Default)

To disable front panel USB devices’ ACPI

S3/S4/S5 wake up function

pin-1

CLOSE Pins 2 and 3

To enable front panel USB devices’ ACPI

S3/S4/S5 wake up function

Total current of all USB devices should not exceed the standby current rating of the power supply

2.13 – IEEE 1394 Connector (J66)

Connects to a 1394 device via an optional 1394 cable

2.14 – LCD Connector (J69)

Connects to a LCD display via an optional cable

13

http://www.TYAN.com

Image 13
Contents Thunder S2665 Table of Contents Before you begin… Check the box contents Introduction BiosIntegrated I/O Integrated PCI IDESystem Management Form FactorInstallation Board InstallationHow to install our products right….the first time Do not Apply Power to the Board if IT has Been DamagedBoard Page Close Pin-1 and Pin-2 Default Jumper and Connector Settings FunctionClose Pin-1 and Pin-2 Default J65 J11Enable/Disable Onboard LAN Jumper J10 J16 CD Audio connectorFan Connectors J11, J19, J22, J32, J38, J55 and J60 ClosePin-3 Close Pins 2 PS/2 Acpi Jumper J12 Pin-3 Close Pins 1 and 2 DefaultFlashing Bios Protection Jumper J13 Disable Slot-B and Slot- C PCI- X Capa bility Jumper J31 Disable Slot-A PCI-X Capability Jumper J30Clear CM OS Jumper J50 Default Ieee 1394 Connector J66 Pin-1 Close Pins 2LCD Connector J69 GND VCCOEM Reserved Connectors and Jumpers Front Panel Connector J74 Signal Description Pin #Scsi RAID PCI Slot-C Mounting the Motherboard Installing the MemoryMemory Installation Procedure Reminder Installing the Processors and HeatsinksPage Installing Add- In Cards Finishing Installing the HeatsinkSpdif Spdif RCA connector Connecting External DevicesRJ45 LAN Port Ieee Ieee 1394 connector Audio Port Line In JackInstalling the Power Supply Attaching IDE and Floppy Drive Cables Finishing Up Bios Setup Utility BiosMain To select an itemBios Legend Bar Bios Menu BarKey Function Enable Acpi Sub-Menu Feature Bios Main MenuInstall OS Sub-Menu Feature Win2000/XP Reset Configuration Data Sub-Menu FeatureProcessors Sub-Menu Feature Option Description Bios Advanced MenuEnabled Chipset Sub-Menu Feature Option DescriptionECP IRQ4IRQ7 DMA3PCI Device Slot n Sub-Menu Feature Option Description AGP Slot Sub-Menu Feature Option Description128Mb Bios Power Menu Bios Security MenuPower Remote Power -On Sub-Menu Feature Option DescriptionAGP Load Setup Defaults Bios Exit MenuExit Exit Saving ChangesCPU, Memory, Video Beep Codes DiagnosticsFlash Utility Appendix I Glossary Page Page Page Technical Support Returning Merchandise for ServiceDocument # D1491