Tyan Computer Thunder i7505 Integrated PCI IDE, Integrated I/O, System Management, Form Factor

Page 5

Integrated PCI IDE

§Provides two PCI bus master channels for up to four Enhanced IDE devices

§Supports for UDMA 33/66/100 IDE drives and ATAPI compliant devices

§Supports up to four Enhanced IDE devices

Integrated I/O

§Six USB 2.0 and 1.1 compatible ports

(4 rear connectors and 2 front panel headers via an optional USB cable)

§Supports one floppy drive with 3 mode

§One 9 -pin serial connector

§One 25-pin ECP/EPP/SPP parallel connector

§PS/2 mouse and keyboard connectors

§Two IEEE1394 (firewire) ports (1 rear connector and 1 front connector)

§One SPDIF RCA connector

System Management

§Total seven 3 -pin fan headers

§Six fan headers with tachometer monitoring

§One 3 -pin Chassis Intrusion header

§Temperature, voltage and fan monitoring

Form Factor

§SSI EEB v3.0 footprint (12" x 13")

§8-layer design

§EPS12V with WS 6 -pin power connectors

§Stacked PS/2 keyboard and mouse ports

§Stacked four USB2.0/1.1 ports

§Stacked one serial port and one parallel port

§One RJ45 LAN port with LEDs

§One IEEE-1394 port

§One SPDIF RCA port

§Audio Line-in, HI-out, and Mic -in ports (Amplifier integerated)

Regulatory

§FCC DoC (Declaration of Conformity)

§European CE (Declaration of Conformity)

5

http://www.TYAN.com

Image 5
Contents Thunder S2665 Table of Contents Before you begin… Check the box contents Introduction BiosIntegrated I/O Integrated PCI IDESystem Management Form FactorInstallation Board InstallationHow to install our products right….the first time Do not Apply Power to the Board if IT has Been DamagedBoard Page Close Pin-1 and Pin-2 Default Jumper and Connector Settings FunctionClose Pin-1 and Pin-2 Default J65 J11Enable/Disable Onboard LAN Jumper J10 J16 CD Audio connectorFan Connectors J11, J19, J22, J32, J38, J55 and J60 CloseFlashing Bios Protection Jumper J13 PS/2 Acpi Jumper J12 Pin-3 Close Pins 1 and 2 DefaultPin-3 Close Pins 2 Clear CM OS Jumper J50 Default Disable Slot-A PCI-X Capability Jumper J30Disable Slot-B and Slot- C PCI- X Capa bility Jumper J31 LCD Connector J69 Pin-1 Close Pins 2Ieee 1394 Connector J66 GND VCCScsi RAID PCI Slot-C Front Panel Connector J74 Signal Description Pin #OEM Reserved Connectors and Jumpers Mounting the Motherboard Installing the MemoryMemory Installation Procedure Reminder Installing the Processors and HeatsinksPage Installing Add- In Cards Finishing Installing the HeatsinkSpdif Spdif RCA connector Connecting External DevicesRJ45 LAN Port Ieee Ieee 1394 connector Audio Port Line In JackInstalling the Power Supply Attaching IDE and Floppy Drive Cables Finishing Up Bios Setup Utility BiosMain To select an itemKey Function Bios Menu BarBios Legend Bar Enable Acpi Sub-Menu Feature Bios Main MenuInstall OS Sub-Menu Feature Win2000/XP Reset Configuration Data Sub-Menu FeatureProcessors Sub-Menu Feature Option Description Bios Advanced MenuEnabled Chipset Sub-Menu Feature Option DescriptionECP IRQ4IRQ7 DMA3128Mb AGP Slot Sub-Menu Feature Option DescriptionPCI Device Slot n Sub-Menu Feature Option Description Bios Power Menu Bios Security MenuPower Remote Power -On Sub-Menu Feature Option DescriptionAGP Load Setup Defaults Bios Exit MenuExit Exit Saving ChangesFlash Utility DiagnosticsCPU, Memory, Video Beep Codes Appendix I Glossary Page Page Page Technical Support Returning Merchandise for ServiceDocument # D1491