Vantec UGT-ST310R user manual Table of Contents

Page 2

Table of Contents
1.	Bus Interface	3
2.	Connectors	3
3.	Package Contents	3
4.	System Requirements	4
5.	Hardware Description	4
6.	Hardware Installation	5
7.	Device Connection	5
8.	RAID Arrays	6
	RAID 0 (Striping)	6
	RAID 1 (Mirror)	8
	RAID 0+1 (Mirroring + Striping)	9
	RAID 5 (Parity)	11
	CONCATENATION (JBOD)	13
9.	BIOS Configuration	15
10.	Driver Installation	15

UGT-ST310R

Page 2

Image 2

Contents Port Sata II 150 PCI Host Card w/RAID Table of Contents Bus Interface ConnectorsPackage Contents System Requirements Hardware DescriptionHardware Installation Device ConnectionConfiguration Auto configuration recommendedSize, Manual Configuration is offered RAID ArraysSelect Manual configuration then press Enter Manual configurationSelect Auto configuration, then press Enter For Existing Hard Drives with Data Select Manual configuration, then press EnterRAID 1 Mirror For New/Blank Hard Drives Select Create with data copy, then press EnterRAID 0+1 Mirroring + Striping When asked Are you sure to exitY/N?, press Y to exitRebuilding a Failed Mirror Set Select Create RAID Set then press EnterAuto configuration recommended Select Create without data copy then press Enter RAID 5 ParityEnter When asked Are you sure to exitY/N?, press Y to exit Concatenation Jbod Deleting RAID ArraysLogical Drive Info Resolving ConflictsLow Level Format For Windows Bios ConfigurationDriver Installation For Windows XP/Server For Windows XP-x64/Server For Windows Vista To Verify Windows Installation For Windows Vista-x64For Windows XP-x64/Server 2003-x64/Vista-x64 Sata RAID 5 Management Software InstallationFor Windows 2000/XP/Server 2003/Vista