Vantec UGT-ST310R user manual System Requirements, Hardware Description

Page 4

System Requirements

zPentium-class computer with one available PCI slot

zWindows® 2000, XP/2003 32/64bit, Vista 32/64bit

Hardware Description

		G (Jumper Settings)
	JP	Description	Active Port
	J1-J4	1-2 close	Enable SATA Connector
			F
		2-3 close	Enable SATA Connector
			C
	J5-J8	1-2 close	Enable SATA Connector
			E
		2-3 close	Enable SATA Connector
			D

UGT-ST310R				Page 4

Image 4

Contents Port Sata II 150 PCI Host Card w/RAID Table of Contents Package Contents ConnectorsBus Interface System Requirements Hardware DescriptionHardware Installation Device ConnectionAuto configuration recommended Size, Manual Configuration is offeredConfiguration RAID ArraysSelect Auto configuration, then press Enter Manual configurationSelect Manual configuration then press Enter Select Manual configuration, then press Enter RAID 1 Mirror For New/Blank Hard DrivesFor Existing Hard Drives with Data Select Create with data copy, then press EnterWhen asked Are you sure to exitY/N?, press Y to exit Rebuilding a Failed Mirror SetRAID 0+1 Mirroring + Striping Select Create RAID Set then press EnterAuto configuration recommended Enter RAID 5 ParitySelect Create without data copy then press Enter When asked Are you sure to exitY/N?, press Y to exit Concatenation Jbod Deleting RAID ArraysLow Level Format Resolving ConflictsLogical Drive Info Driver Installation Bios ConfigurationFor Windows For Windows XP/Server For Windows XP-x64/Server For Windows Vista To Verify Windows Installation For Windows Vista-x64For Windows 2000/XP/Server 2003/Vista Sata RAID 5 Management Software InstallationFor Windows XP-x64/Server 2003-x64/Vista-x64