Priority Tag Insert/Remove
Sets each port's tagging control. There are four choices of port tagging control:
Disable: No port tagging control on this port.
Remove tag: Removes the packet’s tag as the packet passes through this port.
Insert Tag (high priority only): Inserts the packet’s tag as the packet passes through the high priority port.
Insert Tag (All frame): Inserts the packet’s tag when the packet passes through this port.
Priority Tag Insert/Remove interface
System
You can enable VLAN function and broadcast storm filtering control, set up the name of the switch, and reset the switch to default value. Enter the selection number to configure.
VLAN Function: enter “1” to change the value.
Switch Name: enter “2” to change the switch name. The default switch