UNICOM Electric GST-2402 specifications Features

Page 5

connections over long distances.

Features

IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE802.3ab 1000Base-T, IEEE802.3z Gigabit fiber

Twenty-four 10/100TX ports plus one expansion slot with RS-232 for management

Expansion modules available: 100FX, 1000T, 1000SX/LX

IEEE802.3x Flow control:

Pause-frame for full duplex mode

Backpressure for half duplex mode

Store-and-forwarding switching architecture for abnormal packet filtering

High switch fabric up to 8.8Gbps

8K-entry MAC address table

2.5Mbits memory buffer

Broadcast Storm filter supported

Support PortBase VLAN

Class of service supported

IEEE802.3ad Port trunk supported

Non-Blocking full wire speed architecture

Fan free design

Ingress and egress bandwidth control

Image 5

Contents SmartGST-2402 Introduction Appendix SmartGST-2402 IntroductionFeatures Software Features Ethernet Switching Technology Package ContentsPage Front Panel Hardware DescriptionRear Panel LED IndicatorsAttaching Rubber Feet Desktop InstallationAttach mounting brackets with screws Rack-mounted InstallationMounting the Switch in an EIA standard 19 Rack Power OnSmall Workgroup Network ApplicationSmall Workgroup Application Segment BridgeDepartment Bridge Application Connecting to the SwitchConsole Management Login in the Console InterfaceMain Menu Trunk Configuration configure Trunk functionControl Key description Port Status Port ConfigurationTrunk Configuration Trunk Status QoS System Priority Tag Insert/RemoveAdd Vlan Group Vlan Member SetupDelete Vlan Group Save Faulty or loose cables TroubleshootingIncorrect connections Non-standard cablesCabling Diagnosing LED IndicatorsTechnical Specification Power Console Port Pin Assignments Appendix100BASE-TX/10BASE-T Pin Assignments Cable Types and Specifications Max. Length ConnectorCables RJ-45 Pin Assignments Pin Number Pin MDI-X Signal Name MDI Signal Name