UNICOM Electric GST-2402 specifications Segment Bridge, Small Workgroup Application

Page 15

Figure 3-1. Small Workgroup Application

Segment Bridge

This switch is an ideal solution for departmental users in corporate backbones where large data broadcasts are constantly broadcast.

In the illustration below, two Ethernet switches with PCs, a print server, and a local server are all connected to the Switch. All the devices in this network can communicate with each other through the Switch. Connecting servers to the Switch allow other users to access the data on server.

Image 15
Contents SmartGST-2402 Introduction Appendix SmartGST-2402 IntroductionFeatures Software Features Ethernet Switching Technology Package ContentsPage Front Panel Hardware DescriptionRear Panel LED IndicatorsAttaching Rubber Feet Desktop InstallationAttach mounting brackets with screws Rack-mounted InstallationMounting the Switch in an EIA standard 19 Rack Power OnSmall Workgroup Network ApplicationSmall Workgroup Application Segment BridgeDepartment Bridge Application Connecting to the SwitchConsole Management Login in the Console InterfaceMain Menu Trunk Configuration configure Trunk functionControl Key description Port Status Port ConfigurationTrunk Configuration Trunk Status QoS System Priority Tag Insert/RemoveAdd Vlan Group Vlan Member SetupDelete Vlan Group Save Non-standard cables TroubleshootingFaulty or loose cables Incorrect connectionsCabling Diagnosing LED IndicatorsTechnical Specification Power Console Port Pin Assignments AppendixCable Types and Specifications Max. Length Connector Cables100BASE-TX/10BASE-T Pin Assignments RJ-45 Pin Assignments Pin Number Pin MDI-X Signal Name MDI Signal Name