UNICOM Electric GST-2402 specifications Desktop Installation, Attaching Rubber Feet

as shown in Figure 2-3. The Switch will work with AC in the range 100-240V AC, 50-60Hz.

Figure 2-3. The Rear Panel of SmartGST-2402

Desktop Installation

Set the Switch on a sufficiently large flat space with a power outlet nearby. The surface where you put your Switch should be clean, smooth, level and sturdy. Make sure there is enough clearance around the Switch to allow attachment of cables, power cord and allow air circulation.

Attaching Rubber Feet

A.Make sure mounting surface on the bottom of the Switch is grease and dust free.

B.Remove adhesive backing from your Rubber Feet.

C.Apply the rubber feet to each corner on the bottom of the Switch. These footpads can protect the Switch from shock/vibration.

Figure 2 4 Attaching Rubber Feet to each corner on the bottom of the Switch