UNICOM Electric GST-2402 specifications Console Management, Login in the Console Interface

Page 17

4. Console Management

Login in the Console Interface

When the connection between Switch and PC is ready, turn on the PC and run a terminal emulation program or Hyper Terminal and configure its communication parameters to match the following default characteristics of

the console port:

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bit: 1

Flow control: None

Figure 4-1. The settings of communication parameters

After finishing the parameter settings, click “OK“. When the blank screen shows up, press Enter key to bring out the console management main screen. Then, press any key to enter the function management screen.

Image 17
Contents SmartGST-2402 Introduction Appendix SmartGST-2402 IntroductionFeatures Software Features Ethernet Switching Technology Package ContentsPage Front Panel Hardware DescriptionRear Panel LED IndicatorsAttaching Rubber Feet Desktop InstallationAttach mounting brackets with screws Rack-mounted InstallationMounting the Switch in an EIA standard 19 Rack Power OnSmall Workgroup Network ApplicationSmall Workgroup Application Segment BridgeDepartment Bridge Application Connecting to the SwitchConsole Management Login in the Console InterfaceMain Menu Trunk Configuration configure Trunk functionControl Key description Port Status Port ConfigurationTrunk Configuration Trunk Status QoS System Priority Tag Insert/RemoveAdd Vlan Group Vlan Member SetupDelete Vlan Group Save Faulty or loose cables TroubleshootingIncorrect connections Non-standard cablesCabling Diagnosing LED IndicatorsTechnical Specification Power Console Port Pin Assignments Appendix100BASE-TX/10BASE-T Pin Assignments Cable Types and Specifications Max. Length ConnectorCables RJ-45 Pin Assignments Pin Number Pin MDI-X Signal Name MDI Signal Name