English
Installation Instructions
Step One: Connect Your Router
1.Connect your DSL or Cable modem to the router:
A.Power off your computer and your DSL or Cable modem.
B.Do one of the following:
.If your modem connects to your computer with an Ether- net cable: Locate the Ethernet cable that connects your DSL or Cable modem to your computer’s Ethernet adapter, and disconnect it from your computer only: do not disconnect the cable from your DSL or Cable modem
If your modem connects to your computer with a USB cable: Disconnect the USB cable from both the modem and your compu- ter. You will need another Ether- net cable in addition to the one provided with the Wireless Router. Connect one end of the Ethernet cable to the Ethernet port on the back of your DSL or Cable modem.
C. Connect the free end of the Eth- ernet cable to the WAN port on the rear of the router.
2. Connect the router to your computer and wired network devices:
A. Connect one end of the supplied Ethernet cable to your computer’s Ethernet port.
B. Connect the other end to one of the router’s LAN ports
3. Power up the network:
A. Turn on your modem. Wait until the modem LEDs stabilize before powering up your router.
B. Connect the supplied power adapter to the 3.3VDC port on the router.
C. Plug the power adapter into a standard power outlet
.
N o t e : This product is intended to be supplied by a Listed Direct
Power Unit marked Class 2 and rated 3.3 VDC, 2000 mA.
D. Turn on your computer.
2