English Owner’s Guide
Note:
•When the 
(center) of the ENT button 11 is pressed at a location that is less than 15 seconds from the start or end of the track, that track may be skipped and the previous or the next track may be selected instead.
Switching to the other side of the tape
Press the BND button 13 . Playback is switched to the other side of the cassette tape.
Auto reverse mechanism
When the end of the cassette tape is reached, the other side of the tape is played automatical- ly without pressing the BND button 13 .
FF scan function
1)Press the Scan button 16 . The first 10 sec- onds of all the tracks on the cassette tape are played repeatedly.
*SCN in the display becomes pink.
Note:
•Scanning is performed only for the track after the one that is currently being played.
2)Press the Scan button 16 at the desired track to cancel scanning and start playback from that position.
*SCN in the display returns to the previous color.
Repeat function
1)Press the Repeat button 17 to play the cur- rent track repeatedly.
*RPT in the display becomes pink.
2)To cancel the repeat function, press the Repeat button 17 again to resume playback.
*RPT in the display returns to the previous color.
Dolby Noise Reduction System
Press the Dolby NR button 18 to turn on the Dolby B NR.
*N R in the display becomes pink.
•The Dolby Noise Reduction System is manufac- tured under license of the Dolby Laboratories Licensing Corporation.
•DOLBY, and the double D mark are registered trademarks of the Dolby Laboratories Licensing Corporation.
*To cancel the Dolby NR, press the Dolby NR but-
ton 18 to turn off the Dolby B NR. N R in the display returns to the previous color.
Blank skip function
Press the Blank Skip button 19 to skip playback to the beginning of the next recorded section when there is a blank space of 12 seconds or more between selections.
*BLS in the display becomes pink.
*To cancel the blank skip function, press the Blank Skip button 19 again. Normal playback is resumed and BLS in the display returns to the previous color.
Notes:
The APC, Scan, Repeat, and Blank skip functions may not work normally with the following tapes:
•Tapes on which the recording level is low.
•Tapes on which there is less than 4 seconds of blank space between selections.
•Tapes on which there are long pauses in the mid- dle of selections.
•Tapes on which there is much noise between selections.
20