Clarion compact disc manual CD Mode Operations, Loading and playing a CD, Ejecting the CD

Page 15
CD Mode Operations

CD Mode Operations

Note:

•CD-ROM discs cannot be played.

Loading and playing a CD

*When a CD is already inserted (When the DISC indicator 8 lights), press the FUNC button 12 and select CD mode. Playback starts automatically.

1)Press the CD button 3 . The operation panel turns downward and the CD Insertion slot 31 appears.

Note:

•When the operation panel angle has been adjust- ed with the SLOPE button 2 (excluding the case when it has been adjusted to the maximum angle), a CD cannot be inserted because the panel may damage it. Press the CD button 3 or press and hold the SLOPE button 2 to set the panel to the maximum angle and insert the CD.

For 5-inch (12 cm) CD For 3-inch (8 cm) single CD

2)Insert the disc into the CD Insertion slot 31 with the label side facing up.

CD mode is set and playback begins auto- matically.

*After a CD is inserted, the operation panel closes automatically. Adjust the panel angle with the SLOPE button 2 . When an operation panel angle has been stored, it is set to that position automatically.

*If the operation panel is turned downward after ejecting a cassette tape or due to other opera- tion, an alarm sounds, the operation panel closes, and the CD playback begins automati- cally.

Loading and playing a CD CAUTION

Do not put your hand or fingers into the Cassette Insertion slot or CD Insertion slot, as this may cause a breakdown.

Be careful not to let your fingers get caught in the panel when it turns upward or down- ward.

3)Slide the Up/Down button 11 to Ejecting the CD (right) or

Manual background (left) to select a track.

Manual background : Selects the next track. (Example: The third track from the current one is select- ed by sliding the button 3 times.)

To return to the beginning of the current track, slide the Up/Down button 11 once

to Manual background (left).

Manual background : Selects the previous track. (Example: The third track before the current one is selected by sliding the button 1+3=4 times (the first sliding returns you to the beginning of the current track).)

Ejecting the CD

1)Press the CD button 3 to eject the CD.

2)Remove the CD.

Remove the CD only when the operation panel is turned downward. The panel closes automatically after a few seconds.

*When the operation panel angle has been stored, it is set to that position.

Notes:

•Do not leave a disc in the ejected position. If the unit is operated in such a condition, it may break down or damage the disc.

•When inserting a disc, insert it until it is fully drawn into the slot.

•When the operation panel is left in downward position, a repeated beep sounds. Remove or fully insert the CD or a tape and close the operation panel.

•Be careful not to let your fingers get caught in the panel when it turns upward or downward.

•When the CD button 3 is pressed, the eject oper- ation is performed even if a disc has not been loaded. During the eject operation, the SLOPE button 2 and the TAPE button 1 cannot be operated.

•If the operation panel is moved due to shock when set to the maximum angle, it must be reset to the maximum angle with the SLOPE button 2 before the CD can be ejected by pressing the CD button

3 .

English Owner’s Guide

21

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 4. HANDLING COMPACT DISCS Note on Compact DiscsEnglish Owner’s Guide First Finger Control Operation 5. BUTTON TERMINOLOGY27Display 30Cassette Insertion Slot 31CD Insertion SlotEnglish Owner’s Guide 6. REMOTE CONTROLInserting the Battery Functions of Remote Control Unit Buttons7. MODE DISPLAY Station title Band Preset channel FrequencyPreset Nos Manual indication Auto store indication Preset scan indicationTrack No EnglishCD Mode CD Changer ModeEnglish Owner’s Guide 8. CAUTIONS ON HANDLINGGood CleaningCleaning the cabinet Cleaning the LCD panelEnglish Turning on the power and adjusting the volume9. OPERATION Basic OperationsEnglish Adjusting the balanceTurning on and off the monitor MuteEnglish Owner’s Guide Setting the clockPreset memory function Seek tuningManual tuning Preset scanningCalling the station with the ISR button Preset selectionSwitchable frequency setting ISR memoryEjecting the cassette tape Stopping pausing playbackTape Mode Operations Loading and playing a cassette tapeRepeat function Switching to the other side of the tapeAuto reverse mechanism FF scan functionEnglish Owner’s Guide CD Mode OperationsLoading and playing a CD Ejecting the CDRepeat play Pausing playbackFast-forwardand fast-backward Scan playScan play CD Changer Mode OperationsListening to a CD Pausing playbackEnglish Owner’s Guide Switching the magazineLocking the magazine Random playTurning on and off the equalizer pattern Operating the EqualizerSelecting the equalizer pattern Designing and storing equalizer patternsEnglish Owner’s Guide Connecting an external monitorRear Vision Camera Monitoring the rear vision cameraEnglish GuideOther Functions Switching the spectrum analyzer displaySwitching the button color Switching the background colorChanging the title TitlingEntering a title Clearing the titleDEMO demonstration Selecting the titleEnglish Owner’s Guide Balanced Mixer FM Front-End- Dual-GateFET Signal Actuated Stereo Control SASC10. FM RECEPTION The AM/FM TunerCause 11. TROUBLESHOOTINGSymptom English Owner’s GuideMode 12.ERROR DISPLAYSEnglish DisplayFM Tuner 13. SPECIFICATIONSRemote Control Unit Tape Player
Top Page Image Contents