Section 1
Product Overview
Operation Overview
Installation and Connections Section 2 p.17
Prepare the required components and connect them.
Main Peripheral Devices
• Cable
• Power supply device
• Contactor
Reading 2D Code | Section 3 p.35 |
Turn ON the power and press the trigger buttons to read the code.
• Reading method
• Field of view setting
• Display details
Section 1 Operation Overview
System Settings |
| Section 4 p.43 |
|
|
|
Basically, no settings are required. However, in the following cases, the settings may need to be changed using the Setup window of the Code Reader or the special tool [2DCR Configear].
• To change the communication conditions (See note.)
•To use various functions
If [2DCR Configear] is used, the changes you
have made will be reflected to the Code Reader using the Memory Card or the communication function of [2DCR Configear].
*1 The default settings are as follows: Baud rate: 9,600 bps; Parity: None; Data length: 8 bits; Stop bits: 1 bit
15 | |
User’s Manual |