Omron V400-H111 user manual How to Use This Manual, Format

Section 4

Section title

Creating

Setting Files Using the 2DCR Configear

Section 4

System Settings

Outline

Creates the data setting file for loading set data to the Handheld 2D Code Reader.

Make the settings for the communications conditions, functions, and display conversion.

Screen display

Section 4

■ Open

Creating

Section4

Index label

Opens the previously created data setting file for editing.

The [Receive (R)] function can be used to open the data file downloaded from the Code

Reader and edit it.

SettingFilesUsingthe2DCR

UploadingfromtheMemory

■ Save

Provides the section number

and subject matter. Can be

Saves the created data setting file.

To save data to the Memory Card, create a folder with the name SETTINGS, and save. If the data is

used to immediately open the

desired page.

saved to a folder other than “SETTINGS”, it cannot be uploaded.

Communication Settings

Configear

Card

The settings shown in the following table are set in the Communication Settings Tab

Page in the Create Setting Data Window.

Describes the settings.

Baud Rate

9,600*, 19,200, or 38,400

Setting item

Settings

Parity

None*, odd, or even

Data Length

77 bits or 8 bits*

Stop Bit

1sbit* or 2 bits

Header/Footer

Prefix

None*, 02 <STX>, or 1B <ESC>

Suffix

ETX, 0A LF, 0D CR*, or 0D0A CR+LF

FCS

ON or OFF*