![](/images/new-backgrounds/1110005/11000557x1.webp)
Section 2 Cable
Section 2
Installation and Connections
Connecting the Cable to the Host Device
1. Connect the cable connector to the
Make sure that the connector is oriented correctly and not inserted at an angle. Secure the connector using the screws on both sides of the connector.
Removing the Cable from the Host Device
1. Remove the cable.
Loosen the screws on both sides of the connector and pull the connector out straight.
Loosen the screws sufficiently on both sides of the connector to remove it. Do not remove the connector by force.
28
User’s Manual