![](/images/new-backgrounds/1110005/110005107x1.webp)
Section 4
System Settings
Uploading from the Memory Card
The Memory Card can be used to upload the setting data to the Handheld 2D Code Reader. The following procedure needs to be performed to reflect the changes made on a Code Reader to two or more Code Readers or to reflect the data set using “2DCR Configear” to a Code Reader.
Starting Setting Mode
1. If the data is created using “2DCR Configear”, the data must be saved to the Memory Card.
To save data to the Memory Card, create a folder with the name SETTINGS, and save. If the data is saved to a folder other than “SETTINGS”, it cannot be uploaded.
2. Start setting mode.
Setting mode can be started by the following two methods. |
| ||
A Turn ON the power to the Code Reader | When using the | When using the | |
while holding both right and left trigger | |||
AC adapter | power supply | ||
|
buttons.
BInsert the Memory Card into the slot while holding both right and left trigger buttons.
The setting mode menu window will be displayed.
53 | |
User’s Manual |
Section 4 Uploading from the Memory Card