![](/images/new-backgrounds/1110005/11000583x1.webp)
|
|
| Section 3 |
|
|
| Reading 2D Code |
|
|
|
|
■ LED Indicators |
| ||
| Indicator | Location | Details |
| Power | On the bottom of the | Lit when power is turned ON, and remains lit during |
|
| monitor | operation |
|
|
|
|
| Memory Card | Beside the Memory Card | Lit while the Memory Card is being accessed. Do not |
|
| slot | remove the Memory Card while this indicator is lit. |
|
|
|
|
■
Read data is output in the following format.
◆Output for Unsuccessful Readings
Nothing is output with the factory setting.
An error code output, however, can be set for unsuccessful readings.
* NG output setting
When the NG output is set to ON, the output contents can be changed. Output contents when NG output is ON:
•The NG mark is displayed on the monitor in red.
•The data “?E000” is sent via
Section 3 Outputting Results
User’s Manual
41