Section 2 Memory Cards
Section 2
Installation and Connections
Memory Cards
The Handheld 2D Code Reader uses a Memory Card to change communication conditions and function settings in the Setup window and to upload/backup the setting data and the data that has been read. SD Memory Cards are supported.
•Conforms to SD Memory Card “Physical Layer Specification 1.01”
•File format: FAT16
Save the data to the Memory Card, insert the Memory Card in the personal computer, and upload the data to easily backup the data to the personal computer. SD Memory Cards are provided with a write prohibit switch to prohibit writing to or formatting of the Memory Card. When the switch is set to LOCK, data cannot be written to or deleted from the Memory Card, and the Memory Card cannot be formatted. These functions are possible by setting the switch to the unlocked state.
Inserting the Memory Card
1. Open the Memory Card slot cover.
Lift the cover gently, without using excessive force.
2. Position the Memory Card in the correct direction and insert in the slot until a click is heard.
Insert the Memory Card in the direction with the label side facing the same direction as the monitor of the Handheld 2D Code Reader.
3. Close the Memory Card slot cover.
32
User’s Manual