Configuring Networks
The following topics provide information on configuring networks.
Viewing Network Activation Information
You can check whether network access is activated.
1.Log in to the home page. (See Logging In as an Administrator.)
2.Click About in the top right corner of the page.
3.Check the Activation Date in the WWAN Info section. This is the date that the USB modem was activated on the Sprint network.
Viewing Data Usage
You can view an estimate of your data usage on the device’s OLED display, and on the NETGEAR 341U Manager’s home page.
Note: The data usage shown is an estimate only and is not accurate for billing purposes.
Note: The session data counter resets automatically each time the device is powered off and on, and when the mobile broadband network connection disconnects and reconnects (for example, when going through a tunnel).The billing plan data counter resets automatically when the next billing cycle starts.
On the OLED Display
The device’s OLED display shows either billing cycle data usage or current session data usage, depending on the format selected in the NETGEAR 341U Manager (see Setting the OLED Display Data Usage Format.)
Configuring Networks | 39 |