External Antennas
Your NETGEAR 341U USB Modem supports the use of external MIMO antennas via two antenna connectors on the top edge of the device.
Important: If you choose to use external antennas, you must connect MIMO antennas to both antenna connectors, otherwise the device will not function correctly. Only antennas approved by NETGEAR for use with the NETGEAR 341U USB Modem are supported.
To connect external antennas:
1.Remove the back cover of the device.
2.Pull back the antenna connector covers and insert both of the antennas.
3.Replace the back cover.
Alerts
Alerts notify you about situations that require your attention and suggest the actions you need to take to resolve them.
Some of the alerts you may encounter include:
nSIM issues (SIM error, PIN locked, MEP locked, not installed)
nRoam Guard
nMobile Broadband disconnected (Connection error)
nAdd more data
nDownloading and Installing Firmware
nAirplane mode
nTemperature error
Device Basics | 9 |