NETGEAR CM400 user manual Product Label, Attach the Feet,  To attach the feet

Page 7

CM400 High Speed Cable Modem

Product Label

The product label on the bottom of the cable modem displays the serial number and MAC address of the cable modem and login information, including the default IP address, default user name, and default password.

Figure 4. Product label

Attach the Feet

The cable modem functions well in either a horizontal or vertical position.

If you prefer to place the cable modem in the upright (vertical) position, attach the feet that come with the cable modem.

To attach the feet:

1.Hold the cable modem in the upright position with the left side of the cable modem pointing down.

2.Snap the feet onto the cable modem.

Figure 5. Attaching the feet

Hardware and Internet Setup

7

Image 7
Contents CM400 High Speed Cable Modem Compliance SupportTrademarks Contents Hardware and Internet Setup Front Panel Unpack Your Cable ModemLED descriptions Back PanelAttach the Feet Product Label To attach the feet  To cable your cable modem Cable Your Cable ModemCable Internet Provider Contact Information  To set up your Internet connectionInstall.charter.com Manage and Monitor Specify the Cable Connection Starting Frequency Log In to the Cable Modem To view the status of the cable modem initialization View Cable Modem Initialization To view cable modem status View Cable Modem Status To view and clear the event logs View and CLear Event Logs To change the password for the user name admin Change the admin Password To reboot the cable modem Reboot the Cable Modem To reset the cable modem to factory default settings Reset the Cable Modem to Factory Default Settings To erase the settings Use the Factory Reset Software ButtonManage and Monitor Troubleshooting Cannot Log In to the Cable Modem Use LEDs to TroubleshootTroubleshoot the Cable Internet Connection Technical specifications Technical Specifications