ProSafe VPN Firewall 200 FVX538 Reference Manual
3.Select a Connection Name. Enter an appropriate name for the connection. This name is not supplied to the remote VPN Endpoint. It is used to help you manage the VPN settings.
Figure
4.Enter a
5.Check the radio box of the WAN interface that will act as one end of this VPN tunnel: WAN 1 or WAN 2.
6.Enter the public WAN IP address of the gateway to which you want to connect. Alternatively, you can provide the Internet name of the gateway. The Internet name is the Fully Qualified Domain Name (FQDN); for example, vpn.netgear.com.
7.Enter the Local WAN IP Address or Internet name. Both local and remote ends should be defined as either IP addresses or Internet Names (FQDN). A combination of IP address and Internet Name is not permissible.
Virtual Private Networking |
v1.0, August 2006