NETGEAR FVX538NA manual Outbound Rules, Services menu see Adding Customized Services on

	ProSafe VPN Firewall 200 FVX538 Reference Manual
Table 4-1. Outbound Rules
Item	Description
Service Name	Select the desired Service or application to be covered by this rule. If the desired
	service or application does not appear in the list, you must define it using the
	Services menu (see “Adding Customized Services” on page 4-21).
Action (Filter)	Select the desired action for outgoing connections covered by this rule:
	• BLOCK always
	• BLOCK by schedule, otherwise Allow
	• ALLOW always
	• ALLOW by schedule, otherwise Block
	Note: Any outbound traffic which is not blocked by rules you create will be allowed by
	the Default rule.
	ALLOW rules are only useful if the traffic is already covered by a BLOCK rule. That
	is, you wish to allow a subset of traffic that is currently blocked by another rule.
Action (Select	Select the desired time schedule (i.e., Schedule1, Schedule2, or Schedule3) that will
Schedule)	be used by this rule.
	• This drop down menu gets activated only when “BLOCK by schedule, otherwise
	Allow” or “ALLOW by schedule, otherwise Block” is selected as Action.
	• Use schedule page to configure the time schedules (see “Setting a Schedule to
	Block or Allow Specific Traffic” on page 4-24).
LAN users	These settings determine which computers on your network are affected by this rule.
	Select the desired options:
	• Any – All PCs and devices on your LAN.
	• Single address – Enter the required address and the rule will be applied to that
	particular PC.
	• Address range – If this option is selected, you must enter the start and finish fields.
	• Groups – Select the Group to which this rule will apply. Use the LAN Groups screen
	(under Network Configuration) to assign PCs to Groups. See “Managing Groups
	and Hosts (LAN Groups)” on page 3-6.
WAN Users	These settings determine which Internet locations are covered by the rule, based on
	their IP address. Select the desired option:
	• Any – All Internet IP address are covered by this rule.
	• Single address – Enter the required address in the start field.
	• Address range – If this option is selected, you must enter the start and end fields.
DMZ Users	These settings determine which DMZ computers on DMZ network are affected by
	this rule. Select the desired options.
	• Any – All PCs and devices on your DMZ network.
	• Single address – Enter the required address and the rule will be applied to that
	particular PC on the DMZ network.
	• Address range – If this option is selected, you must enter the start and finish fields
	of the DMZ computers.

Firewall Protection and Content Filtering 4-3

v1.0, August 2006