NETGEAR FVX538NA manual Router Front Panel, Object Descriptions

ProSafe VPN Firewall 200 FVX538 Reference Manual

•19-inch rack mounting hardware and rubber feet.

•Category 5 (Cat5) Ethernet cable.

•Installation Guide, FVX538 ProSafe VPN Firewall 200

•Resource CD, including:

–Application Notes and other helpful information.

–ProSafe VPN Client Software – five user licenses.

–Trend Micro software evaluation.

•Warranty and Support Information Card.

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the firewall for repair.

Router Front Panel

The ProSafe VPN Firewall 200 front panel shown below contains the port connections, status LEDs, and the factory defaults reset button.

1 2 3 4 5 6 7

Figure 1-1

Table 1-1describes each item on the front panel and its operation.

Table 1-1. Object Descriptions

Object		Activity	Description
1.	Power	On (Green)	Power is supplied to the firewall.
		Off	Power is not supplied to the firewall.
	LED
		On (Amber)	Test mode: The system is initializing or the initialization has failed.
2.	Test LED	Blinking (Amber)	Writing to Flash memory (during upgrading or resetting to defaults).
		Off	The system has booted successfully.

1-6 Introduction

v1.0, August 2006