ProSafe VPN Firewall 200 FVX538 Reference Manual
LAN WAN Inbound Rule: Allowing Videoconference from Restricted Addresses
If you want to allow incoming videoconferencing to be initiated from a restricted range of outside IP addresses, such as from a branch office, you can create an inbound rule. In the example, CU- SeeMe connections are allowed only from a specified range of external IP addresses.
Figure
LAN WAN or DMZ WAN Inbound Rule: Setting Up
In this example, we will configure
If you arrange with your ISP to have more than one public IP address for your use, you can use the additional public IP addresses to map to servers on your LAN or DMZ. One of these public IP addresses will be used as the primary IP address of the router. This address will be used to provide Internet access to your LAN PCs through NAT. The other addresses are available to map to your servers.
The following addressing scheme is used to illustrate this procedure:
•Netgear FVX538 ProSafe VPN Firewall
–WAN1 IP address: 10.1.0.118
–LAN IP address subnet: 192.168.1.1; subnet 255.255.255.0
–DMZ IP address subnet: 192.168.10.1; subnet 255.255.255.0
Firewall Protection and Content Filtering |
v1.0, August 2006