ProSafe VPN Firewall 200 FVX538 Reference Manual
Configuring the VPN Client
From a PC with the Netgear Prosafe VPN Client installed, you can configure a VPN client policy to connect to the FVX538.
To configure your VPN client:
1.
2.In the upper left of the Policy Editor window, click the New Document icon to open a New Connection.Give the New Connection a name, such as to_FVX.
Figure
3.From the ID Type
4.Enter the LAN IP Subnet Address and Subnet Mask of the FVX538 LAN.Check the Connect using radio box and select Secure Gateway Tunnel from the
5.From the first ID Type
6.From the second ID Type
Virtual Private Networking |
v1.0, August 2006