NETGEAR WNDA3100-100NAS user manual What Is in the Box, WNDA3100 Default Wireless Settings

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual

What Is in the Box

The product package should contain the following items:

•NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100

•USB cable and adapter cradle

•Installation Guide for the NETGEAR RangeMax™ Dual Band Wireless-N USB Adapter WNDA3100

•Resource CD, including:

–Driver and configuration utility software

–NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual (this document)

–Animated Network Properties Configuration Tutorial

–PC Networking Tutorial

•Warranty and Support information card

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair.

WNDA3100 Default Wireless Settings

If this is a new wireless network installation, use the factory default settings to set up the network and verify wireless connectivity. If this is an addition to an existing wireless network, you must identify the wireless network and wireless security settings that are already defined.

Your RangeMax Dual Band Wireless-N USB Adapter WNDA3100 basic factory default settings are:

•Network Name Service Set Identification (SSID), Any (First available network)

Note: For the RangeMax Dual Band Wireless-N USB Adapter WNDA3100 to communicate with a wireless access point or wireless adapter, all devices must

be set up to use the same wireless network name (SSID).

•Network mode (Infrastructure or Ad-hoc), Infrastructure

•Data security WEP, WPA2-PSK, or WPA-PSK encryption, Disabled

1-3

v1.0, December 2007