NETGEAR WNDA3100-100NAS user manual Click Save Profile

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual

1.Use the icon to open the Smart Wizard. The Settings tab displays:

Figure 2-4

2.Enter the network settings.

a.In the Network Type section, make sure that Access Point (Infrastructure) is selected.

b.In the Profile field, type the name of the profile.

c.In the Network Name (SSID) field, select a network or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID matches exactly the SSID used by the access point.

3.Save your settings in a Profile.

a.Click Save Profile.

All the configuration settings are saved in this profile.

b.Click Apply, then click Close to exit, or click Cancel to return to the previous settings.

4.Verify wireless connectivity to your network.

2-6

v1.0, December 2007