NETGEAR RangeMax Dual Band
Wireless Network Name (SSID) and Security Settings
Print this form, fill in the configuration parameters, and put it in a safe place for possible future reference. For an existing wireless network, the person who set up the network can provide this information.
•Network Name (SSID). The service set Identification (SSID) identifies the wireless local area network. Any (First available network) is the default WNDA3100 wireless network name (SSID). You may customize it using up to 32 alphanumeric characters. Write your customized wireless network name (SSID) on the line below.
Note: The SSID in the wireless access point is the SSID you configure in the wireless USB adapter. For the access point and wireless nodes to communicate with
each other, all must be configured with the same SSID.
Wireless network name (SSID): ______________________________
•If WPA2-PSK or WPA-PSK authentication is used:
–Passphrase: ______________________________ These characters are
•If WEP authentication is used:
–WEP encryption key size. Identify one:
–Data encryption (WEP) keys. There are two methods for creating WEP data encryption keys. Whichever method you use, record the key values in the spaces below.
•Passphrase method: ______________________________ These characters are
•Manual method. These values are not case sensitive. For
Key 1: _____________________________ Key 2: _____________________________
Key 3: _____________________________ Key 4: _____________________________