NETGEAR WNDA3100-100NAS user manual Setting Up WEP Encryption Security

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual

Setting Up WEP Encryption Security

Follow the steps below to configure WEP encryption security:

1.Run the WNDA3100 Smart Wizard.

a.Make sure that the WNDA3100 software is installed and the wireless USB adapter is connected to the USB port in your computer.

b.Use the icon to open the Smart Wizard. The Settings tab displays:

Figure 2-10

2.Configure the Security settings.

a.In the Profile field, select the profile or type in a profile name.

b.In the Network Name (SSID) field, select the network, or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.

c.In the Security section, select WEP.

2-13

v1.0, December 2007