NETGEAR PS111W manual 2000, 2002 by NETGEAR, Inc. All rights reserved

Page 2

© 2000, 2002 by NETGEAR, Inc. All rights reserved.

Trademarks

NETGEAR and NETGEAR Print Server are trademarks of NETGEAR, Inc.

Microsoft, Windows, Windows NT, Windows Me, and Windows XP are registered trademarks of Microsoft Corporation.

Other brand and product names are registered trademarks or trademarks of their respective holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

•This device may not cause harmful interference.

•This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

EN 55 022 Declaration of Conformance

This is to certify that the NETGEAR Model PS100 series Print Sever is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022

Class B (CISPR 22).

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation and Reference For Netgear PS111W Print Sever 2000, 2002 by NETGEAR, Inc. All rights reserved Bestätigung des Herstellers/Importeurs United States 888-NETGEAR Audience PrefacePurpose Special Message Formats ConventionsRelated Publication Use of Enter, Type, and PressChapter List of FTP Files and Commands Supported by the Print Server Appendix C Config File Features IntroductionFront Panel Front Panel of the Model PS111W Print SeverLabel LEDsLED Descriptions Color Activity DescriptionRear Panel 2Rear Panel of the Model PS111W Print SeverPreparing the Site InstallationVerifying Package Contents Connecting Devices to the Print Server Verifying Power Web Management for Print Server Configuring Print Server for TCP/IPConnecting to the Print Server Browser Menu selections and Configuration Screens Server StatusConfigure Server System Configuration ScreenConfigure Server Fields Print Server Name Password Confirm Password Enable ProtocolsTCP/IP Configuration Fields TCP/IPApple Talk Configuration Fields AppleTalkRegulatory Domain Station Name WirelessConfiguration fields and buttons Channel NoNetwork Type WEP Data Privacy Fields Stat Associated Wireless Link InfoWireless Link Info Fields Current Channel Current Tx Rate ThroughputPrinter Port Printer PortLogical Printer Logical Port FieldsButtons Reset Microsoft Windows System Printing Printing in WindowsNetgear Print Server Software Installation Print Server InstallationInformation Components Destination Location Page There will be a program group created and shown as below Page Setting Up Your PC to Recognize the Print Server Netgear Print Server software IconNetGear Print Server Manual To set up each PC Click on Next Select the PS111W print server and click on Next Auto-IP 13 Set up TCP/IP for Print Server to get an IP address Wireless Configuration 14 Wireless Configuration Click on Finish Netgear Add Printer Wizard Write Down the Port Name Click on OK19 Epson Spool Manager Queue Setup Window Addport Window Epson ConnectionADD Port Window Write Down the Port NameAdd a printer to your system to print Select Printer Port for Add Printer Wizard22 Find and select the printer port 23 Add Printer Wizard 24 Use Existing Driver for Add Printer Wizard 25 Name Your Printer for Add Printer Wizard 26 Share Printer for Add Printer Wizard If you answer Yes to print a test page, see Figure 29 Completing the Add Printer Wizard Unix Printing Using TCP/IP Assigning an IP Address to the Print Server Using BootP Temporary IP Address ResolutionAssigning an IP Address to the Print Server Using Dhcp Assigning an IP Address to the Print Server Using Rarp Assigning an IP Address to the Print Server Using ARP Arp -s Name 00c002xxyyzz Configuring Your Print Server Using FTP Configuration ExampleFTP Files in the Directory FTP CommandsFile Name Purpose Mode Setting the Print Method LPD Configuration and PrintingSample Commands for Using LPD on System Action Sample CommandSample Commands for Using LPD on BSD ActionPrinting Using DSI Printing Using LPDPrinting Using FTP Socket Number DefinitionsSetting up Print Server for AppleTalk AppleTalk PrintingSetting up Host Computer Using PSTool Utility Sample CONFIG.3P Configuration FileEntry inConfig File Description PSTool Utility Config File FormatPSTool Utility Config File Entries Using Advanced Management Tools Buttons Advanced ButtonBrowse Button Field Description Advanced Print Server ConfigurationSystem Tab System Tab Fields TCP/IP Tab TCP/IP Tab WindowAppleTalk Tab AppleTalk TabLogical Port Tab Logical Port Tab WindowPhysical Port Tab Wireless Tab Physical PortSsid Use the same Channel number Wireless Link Info Link Info ScreenMenu Options Control MenuPrinter Menu Configuring Using IP Setup Help MenuAppendix a Technical Specifications General SpecificationsEN 55 022 Cispr 22, Class B Vcci Class B ITE Three Main Address Classes Appendix B Understanding IP AddressesIP Addresses and the Internet Netmask Netmask Notation Translation Table for One Octet Subnet AddressingExample of Subnetting a Class B Address Number of Bits Dotted-Decimal ValueDotted-Decimal Masklength Private IP AddressesNetmask Formats Address Resolution Protocol IP Configuration by DhcpConfiguration Settings Appendix C Config FileConfig File TCP/IP Settings Parameter and CommandConfig File Line Numbers Logical Printer Line NumbersCreating an Ndps Manager Object Appendix D Using NetWare 5 NdpsOverview Create Ndps Manager Object WindowCreating an Ndps Printer Agent Create Printer Agent WindowWorkstation Configuration Configure Port Handler WindowClick on Close Setting Recommended Value Appendix E IP SetupIP Configuration Settings Appendix F Ascii to Hexadecimal Conversion Table Hexadecimal Value Ascii CharacterNetGear Print Server Manual NetGear Print Server Manual
Related manuals
Manual 21 pages 56.15 Kb
Top Page Image Contents