NETGEAR PS111W manual PSTool Utility Config File Format, PSTool Utility Config File Entries

NetGear Print Server Manual

6-4 PSTool Utility CONFIG File Format

The entries of the config file are listed and described in table 7.1. This example is for the 3 port model of the NETGEAR Print Server.

PSTool Utility Config File Entries

Entry inConfig FileDescription

begin CMD

0001 Device Name: xxxxxxxx

3000 Apple Zone: *

3101

AP_PCOMM1: No 3102 AP_PCOMM2: No 3104 AP_PCOMM3:

Do not change this line.

Replace xxxxxxxx with the desired device name. The Device Name will initially be the Default Server Name. The Default Server Name is shown on a sticker on the base of the device. The Device Name can be changed, but the new name must not exceed 16 characters in length

The default value "*" allows all AppleTalk zones to access the Print Server's printers. To restrict access to a particular zone, replace the * with the desired zone name.

These settings determine whether the port uses ASCII or Binary Communication Protocol. Enter No for ASCII or Yes for Binary. The lines corresponds to port 1, 2 and 3 of the print server.

Binary communication is twice as fast as ASCII ASCII communication is more reliable

The computer, Print Server and printer MUST all be configured to use the SAME protocol.

9002 Do not change this line.

Note: NETGEAR does not support PS101 Print Server for AppleTalk printing environment.

64