NetGear Print Server Manual
arp -s NAME 00:c0:02:xx:yy:zz
Use these definitions for entering the information:
NAME is the name of your print server.
00:c0:02:xx:yy:zz is the physical address of the print server. A sample entry is:
arp
To assure that an IP address has been assigned, check the IP address to MAC address association using the ping command:
ping NAME
NAME is the name of the print server. You should receive a response, but if you get a timeout message, the ARP procedure has failed. You can either follow the steps again for using ARP or use one of the other methods for assigning an IP address.
Proceed to “Configuring Your Print Server Using FTP,” which follows.
54